| Characterstics |
Item |
Test Conditions |
Requirement |
| Electrical |
Contact Resistance |
Test Current: 10 mA Max.
Test Voltage: 20mV Max |
50 mΩ MAX. |
| Insulation Resistance |
Test Voltage: 100VAC.
Test Duration: 1 minutes. |
Initial: 500 MΩ Min |
| Dielectric Strength |
Test Voltage: 200V AC.
Test Time: 60 sec. |
No Breakdown |
| Mechanical |
Insertion Force And Withdrawal Force |
Test Speed: 25±3 mm/min. |
|
| |
| Durability |
Insert and withdraw actuator up to 20cycles
at the speed rate of less than 10 cycles/ |
Contact Resistance |
| Initial Value |
≦ 50 Mω |
| Final Value |
≦ 80 mΩ |
| Enviremental |
Vibration |
Amplitude : 1.5㎜
Frequency range: 10~55~10 Hz in 1 minute
Duration: 2 hours in each X.Y.Z axes
Current: 100mA. |
Appearance No Damage |
| Contact Resistance |
≦ 80 mΩ |
| Discontinuity |
1μsec |
| Humidity |
Temperature: 40±2°C
Relative Humidity: 90~95%
Duration: 96 hours |
Appearance No Damage |
| Contact Resistance |
≦ 80 mΩ |
| Insulation Resistance |
≧100MΩ |
| Dielectric Strength |
No Breakdown |
| Solder Ability |
Soldering Time : 3±5 sec
Solder Temperature : 245±5°C |
Solder Wetting |
95% Of Immersed Area Must Show No Voids, Pin Holes |
| Temperature Cycling |
5 cycles of : a) - 55±3°C 30 minutes
b) +25±3°C 30 minutes
c)+ 85±2°C 30 minutes |
Appearance |
No Damage |
| Contact Resistance |
≦ 80 mΩ |
